10/3 ARMORED TYPE P DRILLING RIG MARINE POWER CABLE 600V / 1000kV
[short]
10/3 Armored Type P Drilling Rig Marine Power Cable 600v / 1000kv
Allowable Ampacity For 10-3 Armored Type P Drilling Rig Marine Power Cable 600V / 1000kV : 44 Amps at 105ºC, 41 Amps at 100ºC, 36 Amps at 90ºC
Applications:
Type P Drilling Rig Marine Power Cable is an electrical cable designed for multipurpose use in offshore and onshore drilling and petroleum facilities. Typical applications include power, control, instrumentation, and communication. Type P cables demonstrate excellent capacity in demanding conditions, including extreme cold, heat, vibration, drilling, corrosion, and mechanical stress. The electrical cables are flame-retardant and resistant to moisture. They are armored with a basket weave wire armor per IEEE 1580 and UL 1309/CSA C22.2 No. 245.
Also Known As:
10/3 Type P Rig Cable, 10/3 Type P Cable, 10/3 Type P Drilling Rig and Marine Cable, 10/3 Rig Cable, 10/3 Type P Polyrad Oil Gas XLPO, 10/3 Type P Power Cable, 10/3 Type P Armored, 10/3 Shipboard Cable
Standards:
- • Dual certified IEEE 1580 Type P and UL 1309/CSA C22.2 No. 245 Type X110.
- • Highest ampacity ratings: ABS 100°C, DNV 95°C, LRS 95°C, Transport Canada 95°C
- • Severe cold durability: exceeds CSA cold bend/cold impact (-40/-35°C)
- • Flame retardant: IEC 60332-3 Category A and IEEE 1202
- • NVE 95/1696
- • Transport Canada
- • DET Norske Veritas (DNV)
- • Llloyde’s Register Of Shipping (LRS)
- • American Bureau Of Shipping (ABS)
- • UL Listed As Marine Shipboard Cable
- • United States Coast Guard
- • CSA Listed As Marine Shipboard Cable
Construction:
Conductor:
Soft annealed flexible stranded tinned copper per IEEE 1580 Table 11. High strand count conductors make this product extremely flexible, easier to install and more resistant to vibration than Type MC, IEC spec or commercial cables.
Insulation/Jacket:
Flame Retardant Cross-linked Polyolefin meets the requirements for Type P of IEEE 1580 and Type X110 of UL 1309/CSA C22.2 No. 245. 2000V/IEC 1000V.
Specification:
- • AWG Size: 10
- • MM2: 5.2
- • Nominal Diameter (inches): 0.538
- • Net Weight (Lbs/1000 FT): 281
[/short]
FEATURES:
- High strand count conductors make this product extremely flexible, easier to install and more resistant to vibration than Type MC, IEC spec or commercial cables.
- Lower dielectric constant and higher insulation resistance reduces electrical losses.
- Excellent resistance to moisture produces stable electrical properties throughout the life of the cable.
- In fire conditions, non chlorinated flame retardant system produces.
- Less toxic and less corrosive gasses.
- Dual certified IEEE 1580 Type P and UL 1309/CSA C22.2 No. 245 Type X110.
- Highest ampacity ratings: ABS 100°C, DNV 95°C, LRS 95°C, Transport Canada 95°C
- Severe cold durability: exceeds CSA cold bend/cold impact (-40/-35°C)
- Flame retardant: IEC 60332-3 Category A and IEEE 1202
APPLICATION:
For uses all over the world it is designed and constructed for the demanding environments of offshore drilling and petroleum facilities.
CONDUCTOR:
Soft annealed flexible stranded tinned copper per IEEE 1580 Table 11.
ARMOR:
Basket weave wire armor per IEEE 1580 and UL 1309/CSA C22.2 No. 245. Bronze standard. Tinned copper available by request.
INSULATION/JACKET:
Flame Retardant Cross-linked Polyolefin, meeting the requirements for Type P of IEEE 1580 and Type X110 of UL 1309/CSA C22.2 No. 245. 2000V/IEC 1000V.
RATINGS & APPROVALS:
- NVE 95/1696
- TRANSPORT CANADA
- DET NORSKE VERITAS (DNV)
- LLOYDE’S REGISTER OF SHIPPIN (LRS)
- AMERICAN BUREAU OF SHIPPING (ABS)
- UL LISTED AS MARINE SHIPBOARD CABLE
- UNITED STATES COAST GUARD
- CSA LISTED AS MARINE SHIPBOARD CABLE
