1000 MCM 1C Bare Copper Unshielded EPR PVC 8KV 133% Gaalflex Type MV-105 Cable
[pdf] [/pdf]
1000 MCM 1C Bare Copper Unshielded EPR PVC 8KV 133% Gaalflex Type MV-105 Cable
Allowable Ampacity for 1000 MCM 1C Bare Copper Unshielded EPR PVC 8KV 133% Gaalflex Type MV-105 Cable: 100 Amps
About:
The 1000 MCM AWG 1C Bare Copper Unshielded EPR PVC 8KV 133% Gaalflex Type MV-105 Cable is a specific type of electrical cable with distinct characteristics and uses.
Also Known As:
• This cable is commonly referred to as “1000 MCM AWG MV-105 Cable.”
• The “MV” stands for Medium Voltage, indicating its suitability for medium voltage applications.
• “105” often refers to the maximum operating temperature of the cable, which is 105°C.
Application:
• Used in power distribution and transmission systems.
• Suitable for use in industrial and utility applications, especially where high voltage and temperature resistance are required.
• Often employed in settings like power plants, substations, and other high-demand electrical environments.
Standards:
• UL 1072
• ICEA S-97-682
• ICEA S-93-639
Construction:
• Conductor: Compacted concentric soft drawn bare copper Class B acc. to ASTM
• Inner semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Insulation: Special rubber EPR compound
• Outer semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Screen: Red copper tape
• Outer Sheath: Black (RAL 9005), special PVC compound
Features:
• Suitable for Direct buried, aerial installation, cable trays (CT)*, troughs or raceways *(CT use 1/0 AWG and larger)
• Suitable for wet or dry locations
• Sunlight resistant
• On request compressed or compacted stranded conductors
• On request compacted concentric stranded aluminium conductor Class B acc. to ASTM
• On request LLDPE*, CPE or Halogen-free insulation *(UL does not recognize LLDPE AS MV.105)
• On request red copper wires screen
• On request oil resistant outer sheath
• On request low coefficent PVC outer sheath
• On request acc. to CSA C68.10 (FT4 250 MCM and larger, -40°C cold impact and cold bend)
• acc. to AIEC CS-8
• RoHS approval
Specifications:
• Cross section AWG/MCM: 1 x 1000
• Outer-Ø ca.mm ± 10%: 40,6
• Nominal voltage UL: 5 kV 100%,133%, 8 kV 100%,133%, 15 kV 100%,133% 25 kV 100%,133% 35 kV 100%,133%
• Temperature range UL: operating: up to +105°C, emergency overload: up to +140°C, On short-circuit: up to +250°C
• Min. bending radius: 12 x d
• Cable Weight approx Lbs/Mft: 3810
• Part Number: 48321P7L010AJC
