10×0.34 mm² Bare Copper Shielded TC Braid PVC 250V LiYCY Flexible Control Cable
10×0.34 mm² Bare Copper Shielded TC Braid PVC 250V LiYCY Flexible Control Cable
Allowable Ampacity for 10×0.34 mm² Bare Copper Shielded TC Braid PVC 250V LiYCY Flexible Control Cable: 100 Amps
About:
The “10×0.34 mm² Bare Copper Shielded TC Braid PVC 250V LiYCY Flexible Control Cable” is a specialized type of electrical cable designed for control and signal applications.
Also Known As:
• This cable is often referred to as “LiYCY Shielded Control Cable” or “250V Flexible Control Cable.”
• It may also be known as a “Bare Copper Braided Shielded PVC Cable.”
Application:
Used as a control line for control equipment, assembly lines, transport installations and production lines.
Standards:
• It’s likely to comply with specific international or regional standards for control cables, although the exact standards would depend on the manufacturer and the intended market.
• Designed to meet electrical safety requirements for 250V applications.
Construction:
• Conductor: Flexible bare copper, class 5
• Insulation: Polyvinyl chloride (PVC)
• Veins: Colored according to DIN 47100
• Inner jacket: n/a
• Braiding: Tinned copper wire, braided
• Outer Sheath: Polyvinyl chloride (PVC)
Features:
• The cable’s flexible design is ideal for applications where it needs to be routed through tight spaces or around sharp bends.
• The bare copper conductors ensure efficient signal transmission with minimal resistance.
• The tinned copper braid shield is highly effective at protecting against EMI, which is critical in maintaining the integrity of control signals in industrial environments.
• PVC insulation and sheath offer a balance of flexibility, durability, and resistance to oils, chemicals, and abrasion.
• Typically, these cables are also designed to be flame retardant, adding an extra layer of safety in industrial settings.
Specifications:
• Cores x Cross-Section: 10 x 0.34 mm²
• Outer Diameter approx. in: 8.6 mm
• Minimum installation temp: -5°C
• Maximum conductor temp: +80°C
• Operating temp: min. -15°C, max +70°C
• Mantle Color: Gray
• CPR classification: Eca
• Testing standard: EN50575:2014+A1:2016
• Rated Voltage: 250V
• Test Stress: 2.5kV
• Weight kg/km: 160
