10×0.8 mm² Solid Bare Copper Unshielded PVC Dca /Cca Wall Data Cable
10×0.8 mm² Solid Bare Copper Unshielded PVC Dca /Cca Wall Data Cable
Allowable Ampacity for 10×0.8 mm² Solid Bare Copper Unshielded PVC Dca /Cca Wall Data Cable: 100 Amps
About:
The “10×0.8 mm² Solid Bare Copper Unshielded PVC Dca /Cca Wall Data Cable” you’re referring to is a specific type of data cable.
Also Known As:
This cable is typically known in the industry as a “Twisted Pair Data Cable” or “Unshielded Twisted Pair (UTP) Cable.” The “10×0.8 mm²” refers to the cross-sectional area of each conductor, indicating two conductors of 0.8 mm² each, made of solid bare copper.
Application:
• PVC signal cable with solid copper core.
• Application in low-voltage installations (e.g. calling and security systems), for signal transmission with frequencies up to approximately 100kHz.
Standards:
This cable likely complies with specific telecommunications and fire safety standards. The Dca and Cca ratings under the Construction Products Regulation (CPR) pertain to the cable’s fire performance, focusing on aspects like flame spread, smoke production, and toxicity of gases emitted during combustion. These standards ensure the cable’s safety and performance in building installations.
Construction:
• Conductor: Solid Bare Copper
• Insulation: Polyvinyl chloride (PVC)
• Veins: DIN47100 and NEN1597
• Inner jacket: n/a
• Braiding: n/a
• Outer Sheath: Polyvinyl Chloride (PVC) flame-retardant (mb)
Features:
• Data Transmission: Designed for efficient and reliable data transfer, making it suitable for networking and telecommunications.
• Fire Safety Compliance: The Dca/Cca ratings highlight the cable’s adherence to safety standards regarding fire performance.
• Physical Strength: Solid copper conductors provide strength and durability, making the cable suitable for permanent installations.
• Flexibility and Ease of Installation: The PVC insulation and the cable’s construction balance flexibility with ease of installation in walls and cable conduits.
Specifications:
• Cores x Cross-Section: 10 x 0.8 mm²
• Outer Diameter approx. in: 7.1 mm
• Minimum installation temp: 0°C
• Maximum conductor temp: +70°C
• Operating temp: min. -15°C, max +70°C
• Mantle Color: White, Gray and Red
• Select: KEMA APPROVAL
• CPR classification: Dca-s2,d0,a3 or Cca-s2,d1,a3
• Testing standard: EN50575:2014+A1:2016
• Rated Voltage: 50V AC / 120V DC
• Test Stress: 1.5kV
• Weight kg/km: 77
