129PO11 3/4″ X 3/4″ Push On Hose Barb X 45 Degree SAE Flare Swivel Brass Fittings 07211-1212
| Approx Wt Lbs: | 0.220 lbs |
| Part Number: | 07211-1212 |
| Shape: | Straight/Connector |
129PO11 3/4″ X 3/4″ Push On Hose Barb X 45 Degree SAE Flare Swivel Brass Fittings 07211-1212
Also Known
129PO11 3/4 X 3/4 BARB
Typical Application:
Low-Pressure Air, Fuel, Lube, and Oil Lines
• Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps are needed!!
• Assembly Instructions
1- Lubricate insert.
2- Hold the hose at an angle to insert over the first barb.
3- Continue to push straight on until the hose is seated under the protective plastic cap. Keep hands back from the hose end area so that hose can expand.
• Disassembling Instructions
1- Split hose. Do not cut completely through hose. Sealing edge of barb could be damaged. 2- Bend hose and remove with a quick pull.
View Catalog Page
