14 AWG Tray Black Control Cable HW15101419
[pdf] [/pdf]
| Number of Conductors | 19 |
| Conductor Material | Bare Copper |
| Number of Strands | 7 |
| Insulation Thickness Mils | 15 |
| Nylon Jacket Thickness Mils | 4 |
| Overall Jacket Thickness Mils | 60 |
| Overall Diameter Inches | 0.687 |
| Weight Lbs/Mft | 396 |
DESCRIPTION:
0.68 in. O.D. General purpose 600 volt control cable for use in power, control and lighting circuits in a broad range of commercial and industrial applications.
APPLICATION:
General purpose cable for use in power, control and lighting circuits in a broad range of commercial and industrial applications. Approved for installation in raceways, open
air, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous
operation at 90°C in wet or dry locations, 105°C for emergency overload conditions, and 150°C for short circuit conditions. Exposed Run (ER) rating available upon request.
Cold bend -25°C per UL 1277.
CONDUCTORS:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8
INSULATION:
Flame-retardant PVC per UL Standard 83 for Type THHN or THWN wire
INSULATION JACKET:
Clear nylon per UL Standard 83 for Type THHN or THWN wire
FLAME TESTS:
• IEEE 383 (70,000 BTU/hr) Flame Test
• ICEA (210,000 BTU/hr) Flame Test
STANDARDS:
• As permitted for non-power-limited fire alarm circuits as defined in NEC Article 760.
• UL listed for exposed runs for cables with 3 or more conductors when installed in accordance with NEC Article 336
