16 AWG 4P Stranded Bare Copper Shielded Al Tape PE PVC RE-2Y(St)Yv 300/500V Instrumentation Cable
[pdf] [/pdf]
16 AWG 4P Stranded Bare Copper Shielded Al Tape PE PVC RE-2Y(St)Yv 300/500V Instrumentation Cable
Allowable Ampacity for 16 AWG 4P Stranded Bare Copper Shielded Al Tape PE PVC RE-2Y(St)Yv 300/500V Instrumentation Cable: 100 Amps
About:
This cable is designed to transmit signals without significant interference in industrial settings. The 16 AWG size indicates the gauge of the wire, with 4P signifying one pair of conductors.
Also Known As:
This type of cable may also be referred to as instrumentation cable, shielded instrumentation cable, or control cable.
Application:
Instrumentation cables are used in data processing and process control and are suitable for fixed installations in damp locations, in open locations, in open spaces and for underground laying.
Standards:
• The “RE-2Y(St)Yv” designation indicates compliance with specific European (VDE or similar) standards.
• The 300/500V rating specifies the voltage range for which the cable is designed.
• It likely meets various industry standards for performance, safety, and resistance to environmental factors.
Construction:
• Conductor: Stranded red copper conductor Cl. 2, acc. to IEC 60228, DIN VDE 0295
• Insulation: PE type 2YI1
• Colour cores: White-black, with black progressively numbered
• Stranding: Conductors twisted in pairs
• Screen: electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Outer Sheath: Blue (RAL 5015) or black (RAL 9005) PVC type TM1, outer sheath reinforced
Features:
• Reinforced outer sheath
• The electrostatic screen protect the screened pairs against outer electrostatic interference fields
• Low level of fine attenuation and low mutual capacitance enable long transmission distances and fast pulse acceleration
• Conductor Resistance: 0,5 mm2: max. 39,0 Ohm/km, 0,75 mm2: max. 24,6 Ohm/km, 1,3 mm2: max. 14,2 Ohm/km
• Insulation Resistance: min. 5 GOhm x km
• Mutual Capacitance: at 800 Hz core/core 0,5 mm2: max. 60 nf/km for 1 and 2 pairs: 75 nF/km core/core 0,75 mm2: 65 nF/km for 1 and 2 pairs: 110 nF/km core/core 1,3 mm2: 75 nF/km for 1 and 2 pairs: 100 nF/km
• Cross-talk attenuation: max. 0,75 mH/km
Specifications:
• No. of pairs x cross section n x mm²: 4x2x1,3
• AWG no.: 16
• Outer-Ø ca.mm ± 10%: 13,5
• Copper Weight kg/km: 114
• Nominal Voltage: Uo/U 300/500 V
• Test Voltage: 2 kV
• Temperature Range: – 30° C up to + 50° C
• Max Short Circuit Temperature: +160° C
• Min. bending radius: 7.5 x d
• Cable Weight approx. kg/km: 230
• Part Number: 47080D7X042M13
