160-23-9590 1100 MCM 1C 61Strand Aluminum Shield 1/3 Neutral 133% EPR Concentric BC PE Okoguard URO-J 15KV URD Cable
[pdf] [/pdf]
160-23-9590 1100 MCM 1C 61Strand Aluminum Shield 1/3 Neutral 133% EPR Concentric BC PE Okoguard URO-J 15KV URD Cable
Allowable Ampacity for 160-23-9590 1100 MCM 1C 61Strand Aluminum Shield 1/3 Neutral 133% EPR Concentric BC PE Okoguard URO-J 15KV URD Cable:100 Amps
About:
This cable is a single conductor (1C), solid aluminum shielded cable, designed for underground residential distribution (URD) with a voltage rating of 15kV. It features an EPR (Ethylene Propylene Rubber) insulation with a concentric neutral design and a polyethylene (PE) Okoguard URO-J jacket.
Also Known As:
• EPR Insulated Aluminum Conductor Cable
• Okoguard URO-J PE Jacketed Cable
Application:
• Okoguard URO-J cables provide maximum circuit longevity in underground residential distribution systems. They can be buried directly or installed in underground ducts or conduits.
Standards:
• ANSI/ICEA S-94-649
• AEIC CS8
• UL 1072
• IEEE 404
• ASTM B609 (Aluminum conductor standards)
Construction:
• Central Conductor: Aluminum per ASTM B-609, Class B stranded per B-231.
• Conductor Screen: Extruded semiconducting ethylene-propylene rubber meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5.
• Insulation: Extruded Okoguard meets or exceeds the requirements of ICEA S-94- 649, AEIC CS8, and CSA C68.5.
• Insulation Screen: Extruded semiconducting ethylene-propylene rubber meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and C68.5.
• Grounding Conductor: Where indicated, bare stranded copper per ASTM B-8 for sizes #7 AWG and smaller, compact round for sizes #8 AWG and larger per ASTM B-496 and in accordance with NEC Table 250.122
• Concentric Conductor: Bare copper wires.
• Jacket: Black Okolene with red extruded stripes meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5 for polyethylene jackets.
Features:
• Triple tandem extruded, all EPR system
• Okoguard cables meet or exceed ICEA standards.
• Meets RUS 1728.204 for cables with filled strand or solid conductor and 133% insulation level.
• 105°C continuous operating temperature.
• 140°C emergency rating.
• 250°C short circuit rating.
• Excellent corona resistance.
• Low dielectric constant and power factor.
• Screens are clean stripping.
• Exceptional resistance to “treeing”.
• Moisture resistant.
• Overall jacket provides extended life.
• Red extruded stripes.
• Excellent resistance to most chemicals.
• Can be listed by UL as Type MV-90 on Special Orders.
• CSA C68.5 listed, LTGG (-40 C), SR.
• Design Options:
• Additional conductor sizes
• Filled strand
• Copper central conductor
• Copper flat strap concentric neutral
• Product identification via colored jackets.
• Semiconducting jacket
• Improved Temperature Rating. Okoguard insulation system has been tested and qualified for operation at 105°C continuous and 140°C emergency operating temperature.
• Minimum installation temperature of -40°C.
Specifications:
• Conductor Size AWG/kcmil: 1100(61X)
• Nominal Dia. Over Insulation (in): 1.61
• Insulation Screen Thickness (miles): 55
• Nominal Dia. Over Insulation Screen (in): 1.74
• Copper Neutral No. x AWG (1): 18X12**
• Nominal O.D (in): 2.01
• Approx. Net Weight: 2470
• 90°C Ampacity Direct Burial (2): 675
• 90°C Ampacity Duct (2): 575
• 105°C Ampacity Direct Burial (2): 730
• 105°C Ampacity Duct (2): 620
• Part Number: 160-23-9590
