163-23-4074 2/0 AWG 1C 19Strand Aluminum Shield Full Neutral 100% EPR Concentric BC PE Okoguard URO-J 25KV URD Cable
[pdf] [/pdf]
163-23-4074 2/0 AWG 1C 19Strand Aluminum Shield Full Neutral 100% EPR Concentric BC PE Okoguard URO-J 25KV URD Cable
Allowable Ampacity for 163-23-4074 2/0 AWG 1C 19Strand Aluminum Shield Full Neutral 100% EPR Concentric BC PE Okoguard URO-J 25KV URD Cable:100 Amps
About:
The “163-23-4074 2/0 AWG 1C 19Strand Aluminum Shield Full Neutral 100% EPR Concentric BC PE Okoguard URO-J 25KV URD Cable” is designed for underground power distribution with high voltage capability. It features a single conductor, aluminum shielding, full neutral copper strands, and is insulated with 100% Ethylene Propylene Rubber (EPR) for excellent electrical properties, covered by a durable polyethylene jacket.
Also Known As:
• 2/0 AWG Single Conductor URD Cable
• High Voltage EPR Insulated URD Cable
• 25KV Aluminum Shielded URD Cable
Application:
• Okoguard URO-J cables provide maximum circuit longevity in underground residential distribution systems. They can be buried directly or installed in underground ducts or conduits.
Standards:
• ASTM standards for material properties and performance.
• ICEA standards for underground residential distribution cables.
• ANSI specifications for safety and quality in high-voltage applications.
• Possible additional certifications for environmental resistance and fire safety, depending on the manufacturer’s specifications.
Construction:
• Central Conductor: Aluminum per ASTM B609, Class B stranded per B-231.
• Filled Strand: Water swellable agent meets or exceeds ICEA T-31-610 water penetration resistance and ANSI/NEMA Class A connectorability requirements.
• Conductor Screen: Extruded semiconducting ethylene-propylene rubber meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5.
• Insulation: Extruded Okoguard meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5.
• Insulation Screen: Extruded semiconducting ethylene-propylene rubber meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5.
• Concentric Conductor: Bare copper concentric wires helically applied.
• Jacket: Black Okolene with 3 red extruded stripes meets or exceeds the requirements of ICEA S-94-649, AEIC CS8, and CSA C68.5 for polyethylene jackets.
Features:
• Triple tandem extruded, all EPR system.
• Okoguard cables meet or exceed ICEA standards.
• Meets RUS 1728.204 for cables with filled strand or solid conductor and 133% insulation level.
• Improved Temperature Rating. Okoguard insulation system has been tested and qualified for operation at 105°C continuous and 140°C emergency operating temperature.
• 250°C short circuit rating.
• Excellent corona resistance.
• Low dielectric constant and power factor.
• Screens are clean stripping.
• Exceptional resistance to “treeing”.
• Moisture resistant.
• Excellent resistance to most chemicals.
• Can be listed by UL as Type MV-90 or MV-105 on special orders.
• CSA C68.5 listed, LTGG (-40°C), SR.
• Design Options:
°Triplexed or Paralleled
°Cable-in-Conduit
°Flat Strap Neutral
°Tinned Wires or Straps
°Water Blocking Powder or Tape
°Product identification via colored jackets
Optional Jacket/UL Ratings
– Semi-conducting PE Jacket.
– FR-PVC Jacket (MV-105).
– XLPE Jacket (MV-105).
– Okolene Polyethylene (MV-90).
– Okolene Polypropylene (non-UL).
– OKOLON TP-CPE® (MV-105).
– OKOCLEAR TP® (TPPO-low smoke zero halogen) MV-105.
Specifications:
• Conductor Size AWG/kcmil: 2/0(19X)
• Nominal Dia. Over Insulation (in): 0.97
• Insulation Screen Thickness (miles): 30
• Nominal Dia. Over Insulation Screen (in): 1.05
• Copper Neutral No. x AWG(1): 14X12
• Nominal O.D (in): 1.32
• 90°C Ampacity Direct Burial (2): 250
• 90°C Ampacity Duct (2): 185
• 105°C Ampacity Direct Burial (2): 270
• 105°C Ampacity Duct (2): 205
• Approx. Net Weight: 990
• Part Number: 163-23-4074
