1×150 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable
1×150 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable
Allowable Ampacity for 1×150 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable: 100 Amps
About:
This cable is designed for medium voltage applications, typically in the range of 6/10KV. It is used for power transmission and distribution in a variety of settings. The designation “1×150 mm²” refers to its single-core construction with a cross-sectional area of 150 square millimeters. The “YMeKrvaslqwd (Cu)” likely indicates specific materials and construction features, with “Cu” signifying the use of copper.
Also Known As:
This type of cable might be known by different names in various industries or regions, often referred to as a medium voltage power cable, XLPE (cross-linked polyethylene) insulated cable, or copper tape shielded cable.
Application:
• Longitudinal waterproof single-core power cable with XLPE insulation for fixed installations from 6/10kV -18/30kV. The copper stranded core is suitable for a maximum conductor temperature of 90°C continuously and is equipped with an insulation screen. Outer sheath made of polythene (PE).
• For distribution networks and industrial applications from 10 kV to 30 kV.
• Various sizes also available as three-wire. For load capacity conditions see NPR 3626 .
Standards:
These cables are typically manufactured in accordance with international and regional standards such as IEC (International Electrotechnical Commission), IEEE (Institute of Electrical and Electronics Engineers), or specific national standards. These standards ensure the cable’s performance, safety, and reliability.
Construction:
• Conductor: Copper multi-wire
• Conductor Screen: Extruded weakly conductive layer
• Insulation: XLPE
• Insulation Screen: Extruded weakly conductive layer
• Swelling Band: longitudinally waterproof
• Earth Screen: Copper wires and copper tape as a counter-spiral
• Filling: Extruded rubber
• Coat: Hard quality PE (3.5 mm)
• Armoring: n/a
• Upholstery: n/a
Features:
• High Voltage Capacity: Capable of handling medium voltage applications, typically in the range of 6 to 10 kV.
• XLPE Insulation: Provides excellent thermal resistance and allows the cable to operate at higher temperatures with reduced risk of degradation.
• Copper Tape Shielding: Offers effective electromagnetic interference shielding and enhances safety in power transmission.
• Robust Design: Constructed to endure environmental factors like moisture, chemicals, and mechanical impacts.
Specifications:
• Cores x Cross-Section: 1×150 mm²
• Outer Diameter approx. in: 35 mm
• Conductor: Under continuous load: 90°C, In case of short circuit: 250°C
• Screen: In case of short circuit (single-wire): 90°C, In case of short circuit (three-wire): 250°C
• Conductor Resistance: yes, acc. IEC 228
• Insulation Resistance: XLPE
• Cross-linking process: Silane
• Dielectric Constant: <2.5
• Loss angle at 20°C: < 10 x 10 -4
• Longitudinal Waterproof: yes, acc. KEMA S10
• Weight kg/km: 2,200
