1×35 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable
1×35 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable
Allowable Ampacity for 1×35 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable: 100 Amps
About:
The “1×35 mm² Bare Copper Tape Shielded XLPE PE 6/10KV YMeKrvaslqwd (Cu) Medium Voltage Cable” is a specialized electrical cable designed for medium voltage applications.
Also Known As:
This cable might be referred to as “35mm² Copper Tape Shielded Medium Voltage Cable,” “1-Core 35mm² XLPE Insulated MV Cable,” or “6/10KV Single Core Copper Shielded Cable.”
Application:
• Longitudinal waterproof single-core power cable with XLPE insulation for fixed installations from 6/10kV -18/30kV. The copper stranded core is suitable for a maximum conductor temperature of 90°C continuously and is equipped with an insulation screen. Outer sheath made of polythene (PE).
• For distribution networks and industrial applications from 10 kV to 30 kV.
• Various sizes also available as three-wire. For load capacity conditions see NPR 3626 .
Standards:
• IEC Standards: For electrical and compatibility requirements at an international level.
• ASTM Standards: Common in the USA for material quality and construction.
• EN Standards (European Norms): If used in Europe, likely to comply with relevant EN standards.
• Local Electrical Codes: Depending on the country, it may also conform to specific local electrical installation codes.
Construction:
• Conductor: Copper multi-wire
• Conductor Screen: Extruded weakly conductive layer
• Insulation: XLPE
• Insulation Screen: Extruded weakly conductive layer
• Swelling Band: longitudinally waterproof
• Earth Screen: Copper wires and copper tape as a counter-spiral
• Filling: Extruded rubber
• Coat: Hard quality PE (3.5 mm)
• Armoring: n/a
• Upholstery: n/a
Features:
• High Voltage Capacity: Capable of handling medium voltage applications, typically in the range of 6 to 10 kV.
• XLPE Insulation: Provides excellent thermal resistance and allows the cable to operate at higher temperatures with reduced risk of degradation.
• Copper Tape Shielding: Offers effective electromagnetic interference shielding and enhances safety in power transmission.
• Robust Design: Constructed to endure environmental factors like moisture, chemicals, and mechanical impacts.
Specifications:
• Cores x Cross-Section: 1×35 mm²
• Outer Diameter approx. in: 28 mm
• Conductor: Under continuous load: 90°C, In case of short circuit: 250°C
Screen: In case of short circuit (single-wire): 90°C, In case of short circuit (three-wire): 250°C
• Conductor Resistance: yes, acc. IEC 228
• Insulation Resistance: XLPE
• Cross-linking process: Silane
• Dielectric Constant: <2.5
• Loss angle at 20°C: < 10 x 10 -4
• Longitudinal Waterproof: yes, acc. KEMA S10
• Weight kg/km: 1,000
