2/0-3 Type SHD-GC Mining Industrial Cable 5001-8000V Sale

2/0-3 Type SHD-GC Mining Industrial Cable 5001-8000V

2/0-3 Type SHD-GC Mining Industrial Cable 5001-8000V

Allowable Ampacity For 2/0-3 Type SHD-GC Mining Industrial Cable 5001-8000V: 243 Amps

Applications:

Type SHD-GC electrical cables are designed for mobile or stationary mining equipment, continuous mining machines or longwall loading machines, blast hole drillers, and heavy-duty trailing cables where maximum protection is required. They are suitable for medium and high voltage use on shovels, draglines, dredges, and cranes. This electrical cable is also suitable for power distribution in mines where more flexibility is desired. American Mustang Type SHD-GC Cable can also be used where a ground check conductor is required for fail-safe monitoring. The temperature range is  –50° C to 90° C.

Also Known As:

2/0-3 Type SHD-GC Power Cable, 2/0-3 Type SHD-GC Cable, 2/0-3 SHD-GC Type Mining Power Feeder Cable, 2/0-3 American Mustang Type SHD-GC Cable, 2/0-3 Type SHD-GC Portable Power Cable, 2/0-3 SHD-GC.

Standards:

• ASTM B-33 and B-172
• MSHA P-136
• UL
• CSA
• ICEA S-75-381/ NEMA WC-58

Construction:

Conductor:

Soft drawn annealed, flexible rope lay, tinned copper conductors, wrapped with a semi-conductive tape (5-25 kV). 

Insulation/Separator/Tape:

 EPR, covered by a nylon semi-conductive tape (5-25 kV) with a tinned copper braided insulation shield, 85% minimum coverage. A Mylar separator is used between the phase conductor and insulation. SBR tape separates the copper ground wires and one HD EPR coated ground check. The outer jacket provides a moderate fill of the cable assembly (nylon core rubber fillers applied as needed for a balanced round cross-section). The SBR tape is applied over the entire cabled assembly aiding core stability and jacket strip ability. 

Jacket:

The outer jacket is a black, flame-resistant, heavy-duty single-pass CPE with excellent resistance to UV, oil, water, solvents, corrosives, cuts, tears, and abrasion.

Specification:

• Gauge: 2/0
• Number of Conductors: 3
• Conductor Strands: 324
• Conductor Insulation: .080”
• Grounding Cond. Size: 4
• Grounding Cond. Strands: 259
• O.D. (Inches): 2.46”
• New Weight lb/1000FT: 4189 lbs   

2-15 KV. Tinned Copper Conductors
EPR Insulation. Tinned Copper Braid Shield.
Heavy Duty CPE Jacket. –50° C to 90° C
14 AWG-500 kcmil.

Applications:

American Mustang Type SHD-GC cables are designed for use with mobile or stationary mining equipment, continuous mining machines or long wall loading machines, blast hole drillers, heavy duty trailing cable where maximum protection is required. Also for medium and high voltage use on shovels, drag lines, dredges, and cranes. This cable is also suitable for power distribution in mines where more flexibility is desired. The cable can also be used where a ground check conductor is required for fail-safe monitoring.

Construction:

American Mustang Type SHD-GC cables have soft drawn annealed, flexible rope lay, tinned copper conductors wrapped with a semi-conductive tape (5-25 kV). The conductors are insulated with EPR, covered by a nylon semi conductive tape (5-25 kV) with a tinned copper braided insulation shield, 85% minimum coverage. ( A Mylar separator is used between the phase conductor and insulation, SBR tape separates the copper ground wires and one HD EPR coated ground check. The outer jacket provides a moderate fill of the cable assembly, (nylon core rubber fillers applied as needed for balanced round cross section). The SBR tape is applied over the entire cabled assembly aiding core stability, and jacket strip ability. The outer jacket is black flame resistant, heavy-duty single pass CPE, which has excellent resistance to UV, oil, water, solvents, corrosives, cuts, tears, and abrasion.

Specifications:

Type SHD-GC cables comply with:

• ASTM B-33 and B-172 
• MSHA P-136 
• UL 
• CSA 
• ICEA S-75-381/ NEMA WC-58