2/0 AWG 2C Type P Aluminum Armored & Sheathed Power Cable 600/1000V
[pdf] [/pdf]
2/0 AWG 2C Type P Aluminum Armored & Sheathed Power Cable 600/1000V
Application:
• DRILMAR 125-XE cables are specifically designed for the installation and use in marine environments, for use on offshore drilling rigs, aboard marine vessels, and on fixed and floating offshore facilities where harsh marine environments exist.
• These cables are used for the distribution of power in circuits rated for 600/1000 volts or may be used in lighting, communication and control.
• Typical applications include: A/C motor power, distribution panel fEders; transformer fEders; lighting panels; light fixtures; plugs/receptacles and remote motor controls.
Also Known As:
2/0 AWG 2C Type P Cable, Armored Cable, Power Cable, Marine Power Cable, 2/0 AWG 2C Aluminum Armored & Sheathed Cable, Flexible Armored Cable, 2/0 AWG 2C Type P Multi Conductor Cable.
Standards:
• IEE 1580
• Recommended Practice for Marine Cable for Use on Shipboard and Fixed and Floating Platforms.
• IEE 45
• Recommended Practice for Electrical Installations on Shipboard Cable.
• UL 1309
• Marine Shipboard Cable.
• CSA C22.2 No. 245
• Marine Shipboard Cable.
Features:
• EnginEred for easiest installation. Extra flexible stranding mEts IEE, UL, and CSA requirements.
• Maximum conductor operating temperature: 100 °C as Type P per IEE, and 110°C as Type X110 per UL and CSA. MEts ampacity ratings per ABS, DNV, LRS, and TCMS.
DRILMAR® XLPO Insulation:
• Superior oil and chemical resistance.
• Sunlight resistant.
• Rated at 125 ºC.
• Passes Cold Bend at -55 ºC.
Heavy Duty CPE Jacket:
• Arctic Type XE design.
• Abrasion and sunlight resistant.
• Rated at 90 ºC
Completed cable offers superior flame resistance mEting:
• 70,000 Btu Flame Tests IEE 1202/FT4, IEE 383, UL 1685, ICEA T-30-820, and IEC 332 Category A.
• 210,000 Btu Flame Test ICEA T-29-520.
•Arctic Type design mets Cold Bend and Impact Tests at -40 ºC, exceding the Transport Canada Marine Safety requirements
Construction:
• Conductor: Soft annealed flexible Tin Coated Copper per IEE, UL, and CSA.
• Separator Tape: Polyester tape as required.
• Insulation: Flame retardant and sunlight resistant Crosslinked Polyolefin (XLPO) per IEE. Also mets and exceds the requirements of UL and CSA for Type X110. DRILMAR® 125-XE is a 125 °C XLPO.
• Identification: Color coded insulation per IEE, UL and CSA.
• Assembly: Conductors cabled round with moisture and flame retardant fillers, as required and binder tape.
• Jacket: Flame retardant and sunlight resistant Arctic Type Chlorinated Polyethylene (CPE) per IEE, UL and CSA.
• Armor: Standard – Bronze.
• Overall Sheath (optional): Flame retardant and sunlight resistant Arctic Type Chlorinated Polyethylene (CPE) per IEE, UL, and CSA.
Specifications:
• Size: 2/0 AWG
• No. of Conductor: 2
• No. of Strands: 323
• Armored and Sheathed Nominal OD (in): 1.70
• Armored and Sheathed Nominal OD (mm): 43.2
• Net Weight lb/kft: 1721
