2 AWG 4 Conductor XLPE Insulated Cable with Helical Bare Copper Tape Shield and CPE Jacket 600V Control Tray Cable
[short]
2 AWG 4 Conductor XLPE Insulated Cable with Helical Bare Copper Tape Shield and CPE Jacket 600V Control Tray Cable
Applications:
2 AWG 4 conductor 7 strand bare copper with XLPE insulation, a helical bare copper tape shield and an overall CPE jacket 600V control tray cable, approved for use in SUN RES DIR BUR OIL RES I & II 90°C applications.
Also Known As:
2/4 XLPE Tray Cable, 2/4 Tape shield, 2/4 CPE Jacket, 2/4 Control Tray Cable, 2/4 Bare Copper Tape Shield, 2/4 Helical Bare Copper, 2/4 XLPE and CPE 600V, 2/4 Tray Cable,
Standards:
- Refer to NEC (NFPA 70) article 336 for installation guidelines
- Cable is suitable for use in Class I Division II hazardous locations
- Individual conductors pass UL VW-1 flame test, rated XHHW-2/VW-1
- UL listed as Type TC-ER per UL Standard 1277 for tray cables
- UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications
- Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
- Meets ICEA S-73-532, where applicable
- All materials used in the manufacture of this cable are RoHS compliant
Construction
Conductors:
AWG Size & Stranding: 2 AWG 7 Strands Class B
Material: Annealed Bare Copper
Conductor Count: 4 Conductors
Insulation:
Material: Cross-linked Polyethylene
Wall Thickness: 0.045
Color Code: Method 1, Table E-2
Assembly:
Lay Length: 15.25” LHL
Fillers: Non-Hygroscopic Polypropylene – As required for a circular cross-section
Binder: Clear Mylar
Shield: 0.005” Helical Bare Copper Tape – 20% minimum overlap
Drain Wire: N/A
Jacket:
Material: Chlorinated Polyethylene
Wall Thickness: 0.080
Ripcord: Yes
Specifications:
- Size (AWG): 2
- Number of Conductors: 4
- Number of Strands: 7
- Diameter: 1.094” ± 0.090”
- Color: Black
- Cold Bend Rating: -25°C
- Weight: 1279 lbs./Mft.
