2 x 4.0 mm² Solid Bare Copper Unshielded PVC 3.5 KV YMvK Dca Installation Cable
2 x 4.0 mm² Solid Bare Copper Unshielded PVC 3.5 KV YMvK Dca Installation Cable
Allowable Ampacity for 2 x 4.0 mm² Solid Bare Copper Unshielded PVC 3.5 KV YMvK Dca Installation Cable: 100 Amps
Application:
High-voltage cables 0.6/1kV that are suitable for all applications for low-voltage installations described in NEN1010 and where high demands are made on fire safety. The cable complies with fire classification Dca-s3,d2,a3 in buildings and functional functions with a medium fire risk (NEN 8012).
Application, for example, as a power supply and control power cable for permanent installation in sight, fixed by means of brackets or on raised saddles, or in the ground in specially designed tubes, gutters or channels. Suitable for use in damp areas. Can also be installed under adverse conditions, such as elevated ambient temperature, and in cable bundles
Also Known as:
Installation Cable, Dca Installation cable, YMvK Cable, Low-Voltage Cable, Light Power Cable, Fire safety Cable
Conductor:
Bare copper, ≤ 6mm 2 : solid, ≥10mm 2 : twisted together
Insulation:
Vulcanized Polyethylene (XLPE)
Jacket:
Polyvinyl Chloride (PVC)
Coat Color:
gray
Specification:
Cores x cross section: 2 x 4.0 mm²
Outer Diameter: 9.6 mm
Conductor: Bare copper, ≤ 6mm 2 : solid, ≥10mm 2 : twisted together
Insulation: Vulcanized Polyethylene (XLPE)
Jacket: Polyvinyl Chloride (PVC)
Rated Voltage: 0.6/1 kV
Test voltage: 3.5 kV
Minimum Installation temp: 0°C
Maximum Conductor temp: +90°C (temporarily overloadable up to 130°C)
Operating temp: min. -40°C, max. +80°C
Weight: 147.83 lbs/1000 Ft
