24″ Front Mount Anti Sway Bracket
[pdf] [/pdf]
| Bracket Type | Anti Sway |
| Bracket Shape | 24” |
| Maximum System Voltage (kV) | 46 |
| Line Angle (degrees) | 0-6 |
| Overall Dimensions (in) | 3-3/4 x 23 x 2 |
| Material | High-Density Polyethylene |
| Finish | HDG |
About:
Designed for distribution voltages up to 46kV, the BAS-24F is an anti-sway bracket used in Hendrix Spacer Cable Systems. This bracket is mounted below a tangent bracket and to the backside of an spacer to stabilize the spacer movement at a tangent pole. The BAS-24F will secure the bottom of the spacer with a molded Clevis Pin (supplied). Hendrix anti-sway brackets are molded using a proprietary gray track resistant high
density polyethylene material.
Application:
Use the BAS-24F Anti-Sway bracket on tangent poles (line angles 0-6°) in distribution systems rated up to and including 46kV. Anti-sway brackets should be used to stabilize spacers.
Mount the bracket to the front of the pole, directly under a tangent bracket. A stirrup is required to hang a spacer from a tangent bracket. Fasten to the pole with one (1) – 1/2″ lag-bolt (not supplied).
Secure the bottom of the spacer to the anti-sway bracket with the provided molded Clevis Pin.
Features:
• Reduces excessive swinging of the Spacer Cable System
• Stabilizes the spacer at equipment tap poles
• Minimizes flexing of the transformer lead wire and stress on connections
• Compatible in both single and three phase Hendrix Spacer Cable Systems
• Increased leakage distance for contaminated areas
